The Hitting Bay
Golf Simulator
Packages & Enclosure Systems
Three enclosure systems — each designed for a different setup scenario. Choose the one that fits how you want to use your garage, basement, or dedicated room. Every system includes the screen.
Note: These packages cover the physical enclosure components — frame, screen, side netting, and mat. The launch monitor, projector, and simulation software are sourced separately. Not sure what else you need? See the full setup overview.
Start Here
Which Enclosure System Is Right for You?
Three questions narrow it down to one system in under a minute.
Your garage also needs to park a car?
→ Retractable Screen System
Deploys in 30 seconds, retracts flush to the ceiling. The car parks. The simulator works. No teardown between sessions.
Dedicated space, want the cleanest finish?
→ DIY Enclosure Kit (most popular)
Permanent frame, screen, and full side netting. Assembles in a few hours. The complete, finished bay look.
Building into a permanent wall or room?
→ Built-In Screen Kit
Wall-mounted system for rooms where the screen is part of the architecture. Custom sizing, 2–3 week lead time.
Not sure which room fits which system? Use the free room configurator — enter your width, depth, and ceiling height and get a specific enclosure recommendation, screen size, and mat pairing for your space in 60 seconds.
Most Popular
The Three Enclosure Systems
Starting from
$2,199
Varies by enclosure size
What's included
- ✓Complete PVC pipe enclosure frame — pre-cut, pre-labelled
- ✓Gungho impact screen matched to enclosure size
- ✓Full side netting — bilateral containment for both swing directions
- ✓Ceiling netting panel — catches topped shots and high misses
- ✓All mounting hardware, straps, and connectors
- ✓Assembly guide and support access
Room requirements
- Width:Room width = enclosure width + 2 ft minimum per side (e.g. 10 ft enclosure needs 14 ft room)
- Depth:Minimum 15 ft — 6 ft hitting depth + enclosure depth + rear space
- Ceiling:10 ft recommended for full driver swing clearance
- Sizes:Multiple widths available — use configurator for exact match
You add separately
- +Hitting mat — Holy Grail Strip from $199 (recommended)
- +Short-throw projector — BenQ TK710STi or similar
- +Launch monitor — Garmin R10, Bushnell LPi, or others
- +Simulation software — GSPro or Garmin Home Tee Hero (free)
- +Gaming PC (required for GSPro/E6)
- +Rubber tiles or subfloor platform
Starting from
$2,899
Varies by screen size
What's included
- ✓Ceiling-mounted retractable screen housing
- ✓Premium impact screen — deploys to exact same position every time
- ✓Electric or manual retraction mechanism (model dependent)
- ✓All mounting hardware and ceiling bracket system
- ✓Assembly and installation guide
- →Side netting not included — add separately or use hitting position away from walls
Room requirements
- Ceiling:Solid ceiling joists accessible for mounting — minimum 9 ft height
- Depth:8–14 ft from screen to hitting position for projector throw
- Width:Screen width + 1 ft per side for housing clearance
- Projector:Ceiling mount projector stays in place whether screen is deployed or retracted
You add separately
- +Hitting mat — rollout strip or Holy Grail Mat (stores when not in use)
- +Short-throw projector — ceiling mount, stays aligned to screen position
- +Launch monitor — store in cabinet between sessions
- +Rubber tiles (car-friendly — stay on floor permanently)
- +Simulation software and PC
Starting from
$1,403
Custom sized to your opening
What's included
- ✓Impact screen custom sized to your wall opening
- ✓Wall-mount frame and tensioning system
- ✓Attachment hardware for permanent wall installation
- ✓All screen border and grommet finishing
- →Enclosure frame not included — screen mounts directly to your room's opening or framed recess
- →Side netting must be added separately or built into room construction
Room requirements
- Opening:Needs a purpose-built or existing framed wall opening to mount into
- Ceiling:10 ft+ recommended — 8 ft minimum for the screen itself
- Depth:Same as DIY setup — 15+ ft for hitting depth and projector throw
- Lead time:2–3 weeks from order to ship for custom sizing
You add separately
- +Hitting mat — Holy Grail Strip or Mat
- +Projector — ceiling mount, short throw
- +Launch monitor
- +Side netting or room construction side containment
- +Simulation software and PC
Complete Your Build
Add the Right Hitting Mat
Every enclosure system needs a hitting surface. These are the two Gungho Holy Grail options — the same construction, different form factors.
Hitting Strip — Install into your platform
Holy Grail Hitting Strip
From $199 · Three sizes
- ✓Installs flush into rubber tile platform or DIY subfloor
- ✓GrassTex Money Putt turf, multi-layer foam, plastic base
- ✓Three sizes: 12×30" ($199), 12×35" ($219), 12×46.5" ($249)
- ✓Pro 46.5" size covers both LH and RH address positions
- ✓Replaceable independently when worn — not the whole platform
- ✓Best for: DIY platform builders, permanent setups
⭐ Full Mat — No platform needed
Holy Grail Hitting Mat
From $199 · Two sizes
- ✓Complete one-piece solution — strip pre-installed, no platform building
- ✓GrassTex standing area, 1-inch dense foam base, velcro anchors
- ✓Two sizes: 4×5 ft (single-sided) and 4×9 ft (dual LH/RH)
- ✓4×9 ft — right and left-handed players, no repositioning needed
- ✓Best for: shared garages, retractable setups, multi-use spaces
- ✓Works perfectly with the retractable screen — rolls out in 30 seconds
Side by Side
System Comparison
| Feature | Built-In Kit | ⭐ DIY Enclosure Kit | Retractable System |
|---|---|---|---|
| Starting price | From $1,403 | From $2,199 | From $2,899 |
| Screen included | ✓ Custom sized | ✓ Matched to enclosure | ✓ Included |
| Side netting | Add separately | ✓ Full bilateral included | Add separately |
| Setup/teardown | Permanent | Permanent | 30-second deploy/retract |
| Room type | Purpose-built / renovated | Any dedicated space | Shared garage / multi-use |
| Assembly | Wall installation required | 2–4 hr DIY | Ceiling mount required |
| Lead time | 2–3 weeks (custom) | Ships 5–7 days | 1–2 weeks |
| Reversible | Difficult | Moderate | ✓ Fully reversible |
| Best for | Dedicated studio room | Garage / basement / spare room | Garage that still parks a car |
Common Questions
Frequently Asked Questions
The packages cover the physical enclosure components — the frame, impact screen, and side netting. To have a complete working simulator you also need a launch monitor (the device that reads your ball data), a short-throw projector, simulation software, and a PC to run the software. You may also want a hitting mat if not included. We've written honest, unbiased guides on all of these: the launch monitor comparison covers every monitor by budget, and the projector placement guide explains throw ratios and specific recommendations. We don't sell those components — which means our recommendations are genuinely unbiased.
The DIY Enclosure Kit. A two-car garage with one dedicated bay gives you enough space for a permanent setup — the car parks in the other bay, the simulator bay has a permanent frame, screen, and netting that never needs to be set up or taken down. The enclosure stays assembled. The hitting mat and launch monitor can be left in position. This is the most popular setup among two-car garage owners and gives you the best simulator experience of the three options.
The Retractable Screen System. The screen housing mounts to the ceiling joists at the garage wall end of the bay. The projector also ceiling-mounts and stays in position. For a session: pull the screen down (30 seconds), roll out the Holy Grail Mat, power up the projector and launch monitor. For parking: retract the screen (30 seconds), roll the mat against the wall (or use the ceiling hoist approach), and the car parks normally. The rubber tiles on the floor are car-friendly — they stay permanently. Total session setup time: under 3 minutes.
Use the room configurator — it's free and outputs the exact enclosure size for your room dimensions in 60 seconds. The general rule: your enclosure width should be your room width minus at least 2 ft per side for swing clearance and frame. A 14 ft wide room fits a 10 ft wide enclosure comfortably. A 12 ft wide room can fit a 8–9 ft enclosure. Don't order to room width — that's the most common return reason.
The DIY Enclosure Kit assembles in 2–4 hours with basic tools (drill, level, tape measure). The frame comes pre-cut and pre-labelled with colour-coded connectors — it's designed for homeowner installation. The retractable screen ceiling mount takes 1–2 hours to install, plus projector mounting. The built-in kit depends on your room preparation — the kit itself installs quickly once the framed opening is prepared. All three systems include assembly documentation and access to support.
Yes — the impact screen itself is the same woven construction in both systems. The difference is the housing mechanism, not the screen material. The retractable screen deploys to the same position every time (the housing is fixed), so the projector alignment never needs adjustment after the initial setup. The projected image from a correctly positioned ceiling-mount projector aimed at a retractable screen is identical to a permanent screen setup. The one practical difference is that the retractable screen has a slightly more complex tensioning system than a frame-mounted screen — getting the tension right during initial installation is important, and the guide covers this in detail.
Not Sure Yet?
Tell us your room.
We'll find your system.
The free room configurator takes 60 seconds. Enter your dimensions and get a specific enclosure system, screen size, and hitting mat recommendation before ordering anything.